References

Our references

Ekströms Värmetekniska AB have during many years supplied heat exchangers such as Economisers, Flue gas coolers and Air preheaters and several thousands meters of different kinds of finned tubes for all kind of applications.

More than 1000 shot cleaning systems has been delivered since this cleaning metod was introduced more than 50 years ago. 

Our customers can be found all over the world.

Flue gas coolers for Smurfit Kappa Nettingsdorf,  Austria

Andritz choose Ekströms as the supplier for the two Flue gas coolers to Smurfit Kappas new recovery boiler at Nettingsdorf mill. The flue gas coolers consists of Double fin tubes. 

Economiser for Borås Energi och miljö, Sobacken, Sweden

Ekströms delivered the Finned tube Economiser for Valmets new Biomass fired boiler in Borås. The Economiser consists of Double fin tubes with a total heating surface of 8.465m². Delivery was made in two units with a weight of about 84 tons each. 

Flue gas cooler for SCA Östrand ,  Sweden

Andritz choose Ekströms as the supplier for the Flue gas cooler to SCA Östrand as part of the capacity increase in the Helios project. The flue gas cooler consists of Double fin tubes with a total heating surface of 11.126m² and a total heat output of just over 12 MW. 

SCA Östrand in Sweden.

Flue gas coolers for Metsä Fibre OY Äänekoski, Finland

During August 2017 Metsä Fibre in Äänekoski started up the first next-generation bioproduct mill, which is the largest wood processing plant in the Northern Hemisphere. Ekströms Värmetekniska AB is the proud supplier of the flue gas coolers for Valmets Technologies new recovery boiler. The four Flue gas cooler, which was delivered end of 2016, has a total weigth of almost 500 tonns.
Metsä Fibre OY, Äänekoski mill

Economiser for Domsjö SP9, Sweden

In september 2016 Ekströms made a successful delivery of a new Fin tube economiser to Domsjö fabriker SP9 in Örnsköldsvik Sweden. The economiser was delivered in 14 units and installed by Andritz during a short time window. The new economiser is replacing an old cast iron Economiser from 1980 also supplied by Ekströms Värmetekniska.
Domsjö Fabriker

Economiser for Strasbourg, France

Ekströms has delivered a Fin tube Economiser for the new 36MWth combind heat and power plant in Strasbourg. The Biomass fueled boiler was supplied by Leroux & Lotz Technologies and reduces Strasbourgs reliability of fossil fuels for generating heat and power significantly. The economiser consists of a total of 1435 pcs of Double fin tubes. Design temperature is 350°C and design pressure 121 Bar.
Fin tube Economiser for Strasbourg

Flue Gas Cooler for Smurfit Kappa in Piteå, Sweden

Ekströms delivered a 5 MW Flue gas cooler to Smurfit Kappa and Pite Energi. The flue gas cooler was delivered as one 60 ton unit and was installed in the autum 2016. It is now producing hot water from waste heat for the district heating system in Piteå in Northen Sweden.
Flue gas cooler for Smurfit Kappa / Pite Energi

Primary Air Cooler for DONG Studstrup, Denmark

Ekströms delivered a Primary Air Cooler for DONG Energy´s power plant in Studstrup, Denmark. The Air cooler, consisting of Ekströms High frequency welded Spiral finned tubes, was a part of the convertion of the former fossil fueled power plant into a biomass fired power plant.
Loading of Air cooler for DONG Energy Studstrup

Economiser for ArcelorMittal, Czech Republic

In january 2015 Ekströms delivered the Finned tube economiser for the new Valmet Boiler at Arcelor Mittal in Ostrava, Czech Republic. The economiser was supplied as two 58 tons units and welded together on site.
Finned tube Economiser for Arcelor Mittal in Ostrava

Flue gas coolers for Mondi Swiecie, Poland

In November 2014 Ekströms supplied two Finned tube flue gas coolers for Andritz new recovery boiler at Mondi Swiecie in Poland. The flue gas coolers has a total capacity of approximate 15 MW.
Flue gas cooler for Mondi Swiecie, Poland

Flue gas coolers for CMPC Guaiba, Brazil

In March 2014 Ekströms supplied flue gas coolers for the new Pulp line at CMPC Guaiba mill supplied by Valmet Power OY. The contract covered design and manufacturing of four pcs of flue gas coolers, 75 tons each, according to ASME VIII Div. 1.
Flue gas coolers for CMPC Guaiba

Economiser for Shotton paper mill, UK

Ekströms has together with A&J Fabtech LTD supplied a replacement fin tube economiser for UPM Shotton paper mill in UK. Ekströms client was Foster Wheeler OY who was handling the replacement and installation of the new economiser consisting of two units, 35 + 50 tons. The installation was done in April 2014.
Fin tube Economiser for UPM Shotton

Shot Cleaning System for Amakulu, South Africa

Ekströms delivered the Shot Cleaning System for the new recovery boiler at SAPPI SAICOR in Amakulu, South Africa.

Economiser for Jönköping, Sweden

In beginning of 2014 Ekströms supplied the Economiser for the new 110MW boiler in Jönköping Torsvik KVVT2 supplied by Valmet Power OY. The economiser consists of 966 pcs of 8,8m Double finned tubes supplied in two units weighing approximate 75 tons each.
Economiser for Jönköping

Air preheaters for Värö bruk, Sweden

In 2012 Ekströms delivered new Primary- , Secondary- and Make-up Air preheaters for Södra Cell Värö. The new air preheaters with stainless steel pressure parts were replacements for the air preheaters of another brand and the installation was executed by Andritz OY.
Air preheaters for Värö

Shot Cleaning System for Gärstadverket, Linköping, Sweden

2 shotcleaning systems were delivered to Babcock Wilcox Völund for Gärstaverket in Linköping, Sweden

Economiser coils for Ratcliff power station in UK

Together with A&J Fabtech Ltd in U.K. Ekströms supplies fin tube economiser coils to Ratcliff power station in 2010 and 2012. Ekströms have made the heat transfer calculations and the design of the coils to fit in the excisting boiler in accordance with BS EN12952 and PED/CE marked. Ekströms supplied loose tubes to A&J Fabtech´s workshop in UK for assembling to coils.
Assembly of Ratcliff Economiser

Economiser coils for Didcot power station in UK

Together with A&J Fabtech Ltd in U.K. Ekströms supplies fin tube economiser coils to Didcot 500MWe coal fired power station in 2006 and 2007. Ekströms have made the heat transfer calculations and the design of the coils to fit in the excisting boiler in accordance with BS EN12952 and PED/CE marked. Ekströms supplied loose tubes to A&J Fabtech´s workshop in UK for assembling to coils.
Economiser coils for Didcot

Gasreheater for Elektronai power station in Lithuania

Ekströms have designed and supplied the gas reheater for boiler No 8 in 2003 and are during year 2007 supplying the reheaters for boiler No 2 and 3. The reheaters is one of the components in the flue gas cleaning system which Alstom Power Sweden AB is the suppliers of.
Gas reheater for Electrenai